Transparent ceramic used nano MgO powder 50nm Magnesia

MgO Magnesium Oxide Nanoparticles widely used as refractory materials.

    Nano-magnesia is a white, odorless, non-toxic powder with a small particle size and a large specific surface area. It has different optical, electrical, magnetic and chemical properties than magnesium oxide, and has high hardness, high purity and high melting point.Nano-magnesia is widely used in electronics, catalysis, ceramics, oils, coatings and other fields.

Nano MaO Powder have high purity,white color and high grade lubricating.

Magnesium Oxide Powders with the 99.9% purity and the high melting point which use for the chemical reagents.

Nano magnesia powder, particle size 20-30nm with 99.9% purity,widely used as composite ceramic materials.

Glass ceramic coatings could be prepared by nano magnesium oxide, nano alumina, nano silica and so on.

Magnesium Oxide nano particles antibacterial 30-50nm         Magnesium Oxide nano particle(MGO) with a wide band-gap is an important inorganic material. MgO nano powder is a promising antibacterial agent because of its high resistance to harsh environment.  For the antibacterial ablity of MgO nano powder is related to the particle size. The antibacterial activity was increased with the decrease of the particle size of MgO nano. For particles in the size range 50-70 nm, the bactericidal efficacy of nano-MgO increased slowly with decreasing particle size. When the size under 40 nm, the bactericidal efficacy of MgO nano increases a lot and could kill more bacteria. This proves that the particle size is smaller the antibacterial efficacy of MgO is stronger. MgO nano particles penetrated the bacterial cell wall and cell membrane. For the size is smaller, and then killed more bacteria. Also MgO nano particles with large specific surface area increase as the size of the nano particles decreases. For the large surface area with lots of reactive groups on the particle surface and high antibacterial activity will be obvious.       Hongwu International Group Ltd is committed to provide high-quality Magnesium Oxide nano particles(30-50nm, 99.9%) with the most reasonable price for customers who are doing nanotech research and have formed a complete cycle of researching, manufacturing, marketing and after-sale servicing. Our products have been sold to many countries around the world.

 Electric grade MgO Magnesium oxide nano powders for electric heating elements

Large SSA ceramic grade MGO Magnesium Oxide nanopowders   R652: Magnesium Oxide NanoPowder(MgO), 20-30nm, 99.9%, white solid powder.   Application of MGO Magnesium Oxide nanopowders in ceramic field 1. Preparation of ceramic capacitor dielectric material. The grain size of the obtained ceramic can be controlled within the range of 1000nm, with small dielectric loss, good material uniformity, which is suitable for the production of  multilayer ceramic capacitor with large-capacity, high insulation resistance, ultra-thin dielectric layer (dielectric layer is less than 10um). The addition amount is about 0.5%-5%. 2. Nano-ceramic powder, made of nano magnesium oxide, nano silica, nano alumina, nano zinc oxide and other powders, among which, nano magnesium oxide is 0.5%-4.0%, and the obtained nano ceramic powder having a far-infrared radiation, antibacterial, activated water, purified water, the dissolution of trace elements which are beneficial to human health, release of negative ions, improve seed germination rate and other healthy functions. It can be widely used in various ceramic products, environmental protection, textiles, drinking water treatment, equipment and containers such as alcohol and tobacco industries. 3. Sintered with nano Alumina( nano Al2O3), titanium dioxide(TiO2) and other together, obtaining nanocomposite ceramic additives can take place of precious metals Nickel/Ni to produce heat-resisting steel alternative. Wherein the amount of nano-magnesium oxide is 5%-18%. 4. Nanocrystalline composite ceramics makes use of nano titanium dioxide(TiO2), MGO Magnesium Oxide nanopowders, nano rare earth oxides and zirconium dioxide(ZrO2) as part of the additives, and successfully increased the content of Amorphous ZrO2 to 10-30wt%, and obtained a high zirconium Al2O3 -SiO2-ZrO2 ceramics, nanocrystalline composite ceramics, and crystal phase content is more than 90%, the main phase is mullite, cristobalite and tetragonal zirconia, tetragonal zirconia grains dispersed in which size is ≤1μm. Through this method, the properties of the materials are superior to that of conventional methods for preparing the same material. The hardness increased by 30%, the toughness increased by 6%, and the strength increased by 40%. 5. The glass ceramic coating,composed of MGO Magnesium Oxide nanopowders, nano silica(SiO2), boron oxide, nano alumina(Al2O3), cerium oxide nanoparticles, can effectively improve the mechanical strength of the catalyst, including abrasion resistance, hardness, compressive strength and impact resistance; and enhance active centers of the catalyst, thereby increasing the activity of the catalyst, saving the active ingredient and reducing costs. It is mainly used in diesel and gasoline engine for exhaust gas purification treatment processors. Wherein the amount of nano magnesium oxide(MgO) is 5%-18%. 6. Preparation of high toughness ceramic materials, using nano magnesium oxide(MgO) and yttrium oxide(Y2O3) or rare earth oxide as nano composite stabilizer to produce partially stabilized zirconia ceramics with excellent mechanical properties and resistence of high-temperature aging. The ceramic material can be widely used in high-temperature engineering components and advanced refractories. 7. As auxiliary components of the anti-reducing dielectric ceramic material. The addition amount is 0.001%-10mol% 8. As single-side carbon dioxide gas shielding arc welding ceramic plate material. Its addition amount of nano MgO is 1-10 wt% 9. The glass ceramics, nano silica(SiO2), nano titanium dioxide(TiO2), nano alumina(Al2O3), nano magnesium oxide(MgO) sintered glass ceramics can be processed by the float glass method to be transparent, especially for thin film semiconductor substrate, specifically applicable to the display and solar cell. Wherein the amount of nano magnesium oxide(MgO) is 6%-20%. by Corrine    

In high crystallinity matrix resin, adding materials with high thermal conductivity is the most effective method to improve plastic thermal conductivity.The thermal conductive filler is refined and even nano size is made, which not only has little effect on mechanical properties, but also improves thermal conductivity. With the addition of nanometer magnesium oxide Magnesia Nanoparticles of high purity, good whiteness, small particle size and uniform particle size, the thermal conductivity is made up of ordinary 33W/(m).K) raised above 36W/(m. K). It can be used in PA, PBT, PET, ABS, PP, organic silicone, coating and other materials to play the role of thermal conduction. Thermal conductive agent: this product has excellent thermal conductivity, suitable for thermal interface materials, such as thermal plastic, thermal resin castable, thermal silicone, thermal powder coating, functional thermal conductive paint and various functional polymer products. The thermal conductivity can reach 3.4w/m.k. when 80% high-purity nanometer magnesium oxide is added into PPS. When 70% aluminum trioxide is added, the thermal conductivity can reach 2.392W/m.K. Notice: Nano Materials have lots of applications that we canot list one by one. And the applications we listed is theorically available according to characteristics of certain Nano Material and researches. For practical applications we would strongly advise you to have sample for testing. Thanks. 

Tungsten Carbide Cobalt WC-12CO Nanoparticles for thermal spraying.

Tungsten carbide cobalt powder, have 6Co, 10Co, 12Co and so on,widely used as thermal spray powder.