Nano Tin Powder Sn Nanoparticles for Lubricant Additive

Superfine high active tin nanopowders widely used in conductive coating.

99.9%  black nano tin powder used for the activated sintering additives. 

Nano tin metal powder, spherical, 70nm, 100nm, 130nm, widely used in metal paste or metal alloy powder. In stock

China factory direct offer quality nano Sn powder Tin nanoparticles, 99.9% high purity,  70nm / 100nm / 130nm. Nano Sn can be applied for lubricant additives.

Hongwu Nano Tin particles Sn has a high theoretical capacity (for example, 994mah/g), and tin-based anode material is considered to be one of the ideal substitutes for commercial graphite-like carbon materials (372mah/g) to meet the following a generation of high-capacity lithium-ion battery needs.

Photocatalytic Materials Superfine Anatase Titanium Dioxide TiO2 Nanopowders.

      Scientists using carbon nanotubes(CNTs) and polymer film to develop new fabrics: can resist chemical and biological weapons       Scientists from Lawrence Livermore National Laboratory used carbon nanotubes and flexible polymer film to make synthesis of a breathable, lightweight fabric, wihch could help soldiers against the chemical and biological weapons.  A unique channel created by Carbon Nanotubes has achieved a good air permeability. Meanwhile, the density of the fabric, of which was only 5 nm pore diameter was quite high. It is understood that biological weaponsa such as viruses, usually it's bigger than 10 nm in size. In the experiment, the scientists confirmed that the new material is with the ability to repel dengue virus.  At the same time, to make the research results protects against chemical weapons also, scientists used some chemical-sensitive materials to improve carbon nanotubes, and ultimately achieved the goal.       Here sells purest and cheapest Carbon Nanotubes in the world. Carbon nanotubes is available with different purity grades and surface functionalization. Carbon Nanotubes is produced by Chemical Vapor Deposition (CVD) method by HW NANO and depending on the diameter one can obtain either single-walled Carbon Nanotubes(SWCNTs) ,double-walled carbon nanotubes (DWCNTs)or multi-walled Carbon Nanotubes (MWCNTs). Our current capacity for the production of MWCNTs far exceeds that of other suppliers.   Spec of carbon nanotubes:   1) SWCNT: diameter: 2nm, Length: short tube 1-2um and long tube 5-20um, purity: >91%,95%,99%   2) DWCNT: diameter: 2-5nm, Length: short tube 1-2um and long tube 5-20um, purity: >91%,95%,99%   3) MWCNT: diameter: 8-20nm,30-60nm,60-100nm, Length: short tube 1-2um and long tube 5-20um, purity: >99%   4) Low purity for the three ones above are all available.   5) Functionalized carbon nanotubes: COOH-CNTs, OH-CNTs, Amino-CNTs, Metal coated CNTs...   6) Dispersion: CNTs water dispersion, and CNTs oil dispersion.  

Single-walled carbon nanotubes can be used in the manufacture of wearable electronic devices because the films formed by single-walled carbon nanotubes have good mechanical and electrical properties, and their electrical conductivity is unchanged even under 140% tensile conditions.

Heat resistant nano zirconium dioxide nanopowders is widely used in refractory materials.

Boron Nitride Nano Powders with the characteristic of A lubricant Corrosion Resistant use to the Antioxidant additives

Best Conductive Material Antimony Doped Tin Oxide(ATO) Nanoparticles from Hongwu has been exported to many countries and regions.

Find metal nickel alloy powder, Permalloy nanoparticles, NIFEMO alloy naopowders from Hongwu International Group Ltd. We are  professional nanoparticles supplier.