Posted on

Carbon Nanotube Will Light Up Your Garage

In the car of the future will not be made of steel or aluminum, and even there are so many high-tech plastic Laden. Originally, CNTs Oil Dispersion, when it comes to steel, 50 times of carbon nanotubes are lighter and stronger. Interestingly, they also for power generation, which means it will change as the object, it illuminates not to use too much energy easily. Well, let us be on carbon nanotubes body future conversation.

Although it is not scheduled for discussion at the “Strategies in Light 2013” symposium it appears to me that many of the top automotive innovators are missing some of the future competition in material science. Right now, many cars are being outfitted with LED headlights, and I’m sure you’ve seen how bright they are, or how bright the taillights are when they light up as you’re driving. Some of the younger generation now, put LED lights on the bottom of their cars which looks very cool, merely for affect.

Still, imagine your car is in a parking lot and you can’t find it. Rather than hitting the car alarm and listening for that chirp, chirp – you can have your car light up the parking lot, and even glow-in-the-dark. This might also be good in your garage. You will not need to replace that light bulb on your Geenie garage door opener when it goes out. All you need to do is hit the alarm disarm button, and the car itself, that is to say the car body will light up your garage for you. Best of all, it will hardly take anything away from your battery, as far as energy is concerned.

Some might say; that’s crazy – but that’s only because they do not understand all the characteristics of these new materials. In fact, the hood over your engine, or your trunk may go opaque while driving, but when you hit a button it becomes transparent so you can see in. In fact, the whole body of the vehicle can be created that way as well. Border crossings for trucks may require that trailers in the future are built of carbon nanotube not only so the trucks get better fuel mileage, but also so that border patrol inspections become very easy to conduct.

If you want to discuss all of this in a higher level, you can contact us think-tank, or shoot me an email. As our car carbon nanotube and cross-country truck will be a reality over the next 5 to 10 years. This will improve fuel mileage, and allow us to many other benefits including I just discussed today. I beg you to consider it.

Posted on

Tungsten Carbide Cobalt Nanopowder Insert Recycling

Tungsten carbide cobalt nanopowder, also known as cemented carbide, is a relatively precious material which is critical to many manufacturing processes. Metal machining process must use tungsten carbide insert tool tip AS, AS hard alloy hardness and wear resistance of a hot ideal shaping, boring, and the metal workpiece. Face Mills the most modern, tool and cutter old lathe used for cutting tools.

The only downside of using carbide inserts for such a wide range of machining processes is that the tungsten material used in creating tungsten carbide alloys is both scarce and expensive. With most tungsten reserves in the US and other Western countries exhausted, China supplies over 80% of the tungsten used worldwide. In 2005, the International Tungsten Industry Association estimated that at the current rate of global consumption, all tungsten reserves will be used up within 140 years. Tungsten carbide inserts are typically treated as disposable materials, even though only the cutting edges of the inserts are worn when they’re disposed.

Rather than disposing of inserts, many manufacturers are turning to recycling companies which purchase used tools.

Why Recycle Carbide Inserts?

Financial Benefits

Tungsten carbide is an expensive material, and most recycling companies are willing to pay for used scrap. By turning used inserts over to recycling facilities, manufacturers can recoup at least a portion of their expenses, lowering their overall material costs. Rates for scrap tungsten carbide fluctuate widely, depending on current market values.

Environmental Benefits

Because carbide inserts contain heavy metals, disposing of them in traditional ways can be quite harmful to the environment. Heavy metals may leech into the soil over time, contaminating ground water. By recycling these, these harmful effects can be largely avoided and global tungsten reserves can be preserved for future generations.

How to Find a Tungsten Carbide Insert Recycling Facility

As more manufacturers are becoming aware of the financial and environmental benefits of recycling inserts, more and more carbide scrap recycling facilities are becoming available around the world. Major worldwide toolmaking companies, including Sandvik Coromant, Kennametal and ATI Stellram, offer their own recycling services for customers. While these companies typically offer recycling services to their own customers, they generally offer a reimbursement for the carbide scrap.

Independent tungsten carbide insert and scrap recycling facilities offer an alternative which in many cases may be more financially beneficial to manufacturers. Carbide recycling providers such as Carbide Recycling Company and Machine Tool Recyclers, Inc. tend to offer the highest and most recent going rate for tungsten carbide, so manufacturers may get more in return for their scrap carbide.

Another option is to require manufacturers and their suppliers to help find the best hard alloy recyclers. Some manufacturers may provide internal circulation, or may have some other use of the waste. Turning with carbide blade back to their interests of suppliers, manufacturers can get a credit for future procurement suppliers.

Posted on

Tungsten Carbide Cobalt Nanopowder Insert Recycling:

Tungsten carbide cobalt nanopowder, also known as cemented carbide, is a relatively precious material which is critical to many manufacturing processes. Metal machining process must use tungsten carbide insert tool tip AS, AS hard alloy hardness and wear resistance of a hot ideal shaping, boring, and the metal workpiece. Face Mills the most modern, tool and cutter old lathe used for cutting tools

The only downside of using carbide inserts for such a wide range of machining processes is that the tungsten material used in creating tungsten carbide alloys is both scarce and expensive. With most tungsten reserves in the US and other Western countries exhausted, China supplies over 80% of the tungsten used worldwide. In 2005, the International Tungsten Industry Association estimated that at the current rate of global consumption, all tungsten reserves will be used up within 140 years. Tungsten carbide inserts are typically treated as disposable materials, even though only the cutting edges of the inserts are worn when they’re disposed.

Rather than disposing of inserts, many manufacturers are turning to recycling companies which purchase used tools.

Why Recycle Carbide Inserts?

Financial Benefits
Tungsten carbide is an expensive material, and most recycling companies are willing to pay for used scrap. By turning used inserts over to recycling facilities, manufacturers can recoup at least a portion of their expenses, lowering their overall material costs. Rates for scrap tungsten carbide fluctuate widely, depending on current market values.

Environmental Benefits
Because carbide inserts contain heavy metals, disposing of them in traditional ways can be quite harmful to the environment. Heavy metals may leech into the soil over time, contaminating ground water. By recycling these, these harmful effects can be largely avoided and global tungsten reserves can be preserved for future generations.

How to Find a Tungsten Carbide Insert Recycling Facility

As more manufacturers are becoming aware of the financial and environmental benefits of recycling inserts, more and more carbide scrap recycling facilities are becoming available around the world. Major worldwide toolmaking companies, including Sandvik Coromant, Kennametal and ATI Stellram, offer their own recycling services for customers. While these companies typically offer recycling services to their own customers, they generally offer a reimbursement for the carbide scrap.

Independent tungsten carbide insert and scrap recycling facilities offer an alternative which in many cases may be more financially beneficial to manufacturers. Carbide recycling providers such as Carbide Recycling Company and Machine Tool Recyclers, Inc. tend to offer the highest and most recent going rate for tungsten carbide, so manufacturers may get more in return for their scrap carbide.

Another option is to require manufacturers and their suppliers to help find the best hard alloy recyclers. Some manufacturers may provide internal circulation, or may have some other use of the waste. Turning with carbide blade back to their interests of suppliers, manufacturers can get a credit for future procurement suppliers.

Posted on

Nano Element Particles For Cosmetics

Most of the company’s cosmetics are manufacturing nanotechnology products. They are usually used in the brand-name products such as sunscreen and anti aging products. But what is nanotechnology? In fact, this is a scientific field, control aims to molecular and atomic level of substance. It can make the product more clean, more powerful, more light, the most important thing is cheap. It also can make compound is too small, so it provides a faster and more effective results. However, you should understand that this technology has not been thoroughly tested, which means that it is uncertain whether really safe, especially if you put it in your body as you face the most vulnerable part of.

The FDA has not yet made a lot of research about this. It seems that there have been no reported cases of adverse effects yet. However, there are some experts which are wondering about the safety of these products since when particles will become smaller, new chemical properties will emerge. Since these nanoparticles are very small then they can quickly slip through your skin layers. This means that it will have an interaction with your bloodstream and immune system. The result can be toxic and it can possible damage your tissues. All major cosmetics companies which are producing nano products are always testing their products and they make sure that they are following all laws in order to insure the safeness of their products. However, the FDA will only investigate the safeness of a particular product once it is already in the market. The testing for cosmetics which are using nanoparticles still continues.

Of most concern to a consumer’s problem is that it is toxic. Cosmetics manufacturers of nanotechnology products, because they are cheaper, at the same time provide faster results and many benefits. Cosmetics company selling these skin care products, because they claim they can provide more effective results. Most people choose a skin care products, free of parabens as natural or organic products. Choose cosmetics you should know that these products contain some chemicals can enter the bloodstream, may harm your body and when. In the purchase of a product is best to consult your doctor working in the Department of dermatology. Look before you leap, avoid everything that is said by the sales staff. Perhaps these benefits may be short-lived. The best thing about nano products is that it can provide fast results. But in the application to your face, you have to read the label carefully. Know all the ingredients, and each ingredient to understand everything.

The idea behind this new technology is that if the particle is too small then it can provide better results , about nanotechnology is it can reduce the ingredients of the cosmetics into a nano size form. It is usually too tiny which can be 1/1000 of a human hair. These Nano Element Particles will be absorbed by the skin and it will directly go to the lower levels of your skin where it can provide the needed benefits.

Posted on

Carbon Nanotubes Are Invisible Barricade

You know that carbon nanotubes are very small and very strong, they do a lot of things almost perfect material. The increase in material science, this technique will allow us to build lighter vehicles that get better gas mileage, the stronger the aircraft structure, more powerful, and all other all.Indeed, our intranet style think tank often discusses Carbon Nanotubes, graphene coatings, and other high-tech materials which are just now hitting the scene. Of course, we are most interested in commercial applications.

Now then, let me tell you about a concept I recently came up with; carbon nanotube road blocks to be used in areas like Afghanistan where we are fighting insurgents. We can build a system which raises and lowers these road blocks so our convoys can get through. If we find insurgents are moving in the middle of the night, perhaps to plant roadside bombs merely leave the roadblocks down and in place. Since we can make these carbon Nanotubes very strong, very thin, you wouldn’t be able to see them as you approached.

Instead, you could have many strings of carbon nano tubes, perhaps only 100 Nanotubes thick, not much wider than a very thin fishing line across the road. The only difference is these fishing lines, would be 250 times stronger than steel. And if you thought the insurgents would most likely be coming on a motorcycle, you could put them across the road at about neck height. These carbon nanotubes would not only stop vehicles, they would cut right through them and make them unable to drive. Indeed they would cut through flesh like it wasn’t even there, shesh – I can hear the angry insurgents now; “that’s not fair!”

Remember, in this case we are dealing with terrorists, members of Al Qaeda, insurgents, or the Taliban and which are hellbent on killing US and NATO troops. And they love to plant their roadside bombs late at night. Of course, if we set up these carbon nano-tube roadblocks, they certainly wouldn’t be able to do that now would they? Please consider all this.Lance Winslow is the Founder of the Online Think Tank, a diverse group of achievers, experts, innovators, entrepreneurs, thinkers, futurists, academics, dreamers, leaders, and general all around brilliant minds.

Posted on

How To Wax Your Car By Nano Diamond Powder

Nano diamond powder is an amazing new product, provide your car with super hydrophobic non wax seal, is guaranteed for one year. Everyone can superhard nano particles contain, will be key will make your car on the surface of billions of.

Learning how to correct the wax the car is every owner should have the skills. This ability is valuable, it goes beyond the work, the results come back to have a look to complete a simple enjoyment. Of course, this kind of feeling is very good, but especially in the long-term value of the job really, you often do.

An effective wax job appropriately applied, safeguards any car from certain minor scratches and hides others, as well as aids in preventing rust especially during the cold months

Showroom Finish For Your Car

That completely new showroom finish is one thing that we all would like to accomplish with our cars. The day you bring an automobile home from the car dealership is often the first and last day it ever appears like that. But this doesn’t need to be. Take time to really learn to wax your vehicle the proper way and you will ensure that it stays looking almost showroom new for much longer time. Obviously, one method to accomplish this look would be to pay to have your vehicle detailed, but where’s the enjoyment in doing that? For this reason, Do-it-yourself, cut costs and enjoy the fruits of your labor.

Researching Car Wax Brands

You will find a variety of brands and designs of automotive wax items available on the market. Take some time to check out the items which are available and find out which of those you believe you may like the best. Often times, consumer rankings value the few less costly brands the most. So, investing in more expensive car waxes, will not necessarily accomplish anything.

Regardless, make certain you stay with a non-abrasive wax to provide the best results.

Preparing Cars for Waxing

Next, perform a thorough cleaning and washing job on the vehicle. Clean it two times if needed to make certain you remove all of the spots you skipped the very first time. Don’t clean it in direct sunlight if it’s hot out, since you really do not want it to dry too quickly. Once it’s clean, you are now prepared to wax. Towel dry any excessive wet areas, especially around the hood.

Waxing a Car Right

Obtain a moisten sponge and squirt a little bit of wax on to the sponge. Give it a try and find out how that amount works best for coverage. Don’t cover much more of a space than you are able to and definitely, don’t too much that it dries before you have completed that area. Make use of a circular motion to rub the wax into the surface of the vehicle. Cover the entire vehicle moving in order surface by surface throughout the entire process so that you won’t miss anything.

Removing the Car Wax

When you return back around to the original surface, the wax you applied is going to be dry. Cloth diapers really are excellent tools for getting rid of excess wax for those who have any available. A terry cloth will even work nicely if it doesn’t have any fresh paint or any other abrasives onto it. Remove the wax using a circular motion in the opposite direction in which you used to apply the wax.

Make certain to remove all the wax by putting sufficient pressure during the wipe off process. Make certain to change towels as frequently as necessary to prevent putting wax back onto the paint surface throughout this activity. This avoids any chance of swirl marks occurring and also any damage to the paint the old wax could cause.

Use clean towel, must pass all the way, to avoid damage and get the best results thoroughly. From the preparatory to the complete cleaning waxing itself and depth, creating the exhibition hall to see you from the start. These represent the boot prompt successful car wax project.

Posted on

Conductive Silver Powder Common Sense

Conductive Silver Powders are the production of electronic paste, conductive silver paste, LED epoxy conductive adhesive, the main raw material of electromagnetic shielding coatings, conductive coating, conductive ink, conductive rubber, conductive plastics, conductive ceramics etc..

 

According to the use conditions of selection of different silver products, ultrafine silver powder is mainly used in high temperature, conductive paste and electrode paste, silver conductive paste is widely used in capacitors, resistors, potentiometers, thick film hybrid lumped circuit, each field sensitive element and the surface mount technology such as the electronics industry. Flake silver powders are mainly used for low temperature polymer paste, conductive ink, conductive coating.

 

Sheet / spherical silver plated copper powder as a can with the traditional pure silver performance equivalent model of high conductive material, add it to the coating (paint), glue (adhesive), ink, plastic, rubber polymer slurry, etc., can be made of a variety of electrical conductivity, electromagnetic shielding products, widely used in electronics, electrical, communication, printing, aerospace, weapons and other various industrial sectors, electromagnetic shielding conductive fields. Such as computer, mobile phone, electronic medical equipment, electronic instruments and other electronic, electrical, communications products, electromagnetic shielding conductive.

 

Conductive Silver Powder is the T3-T30 powder Market representative, has good conductivity, 3M test off powder, resistance is less than 0.5 /10cm/15 m silver content of 3%5%10%15%20% powder delicate, silver copper powder particle size according to customer requirements of some high silver content of ultrafine silver copper powder can be added according to a certain proportion of conductive paint made in sterling silver powder, conductive silver paste, conductive adhesive, conductive printing ink, cost advantages, the use of non cyanide electroless plating process, developed a good electrical conductivity of silver plated copper powder, the powder volume resistivity of less than 2 x 10-3 Omega cm, conductive coating made from the powder as filler, high conductivity (conductive filler and resin weight the ratio of 75 to 25, the volume resistivity is 5 * 10-3 Omega cm) anti migration ability (increased nearly 100 times than the ordinary silver conductive coating (60 DEG C) conducting stability by relative humidity 100% damp heat test for 1000 hours, the volume resistivity increased less than 20%)

 

Posted on

Study On Electrochemical Biosensors Based On CNTs Oil Dispersion

Carbon nanotube dispersion contains a liquid dispersion of carbon nanotubes treated.To synthesize carbon nanotubes resin composite material depends on the corresponding is waterborne resin or organic solvent resin. If it is a water-based resin, of course to use water-based carbon nanotube dispersion, if used in organic solvent resin, dispersion for alcohols.

 

Carbon nanotube resin composite material whether it is to do the conductive properties of modified or mechanical strength of resin composite material structure modification of carbon nanotubes, which needed to be cut to below 1:30 the ratio of length to diameter, will get better results, of course, the prerequisite is the tubular structure does not destroy the process must ensure that the cut in.

 

Carbonnanotubes are strong and flexible but very cohesive. They are difficult to disperse into liquids, such as water, ethanol, oil, polymer or epoxy resin. Ultrasound is an effective method to obtain discrete – single-dispersed – carbonnanotubes.Prior work on asymmetric thermally conductingnanoparticledispersions has shown that it is possible to raise the thermal conductivity of low thermal conductivityliquids at modest volume fractions of nanoparticles. Stable and reproducible nanotubedispersions require careful control of the dispersant chemistry as well as an understanding of their response to input energy. This paper addresses the effects of dispersant concentration, dispersing energy, and nanoparticle loading on thermal conductivity and steady shear viscosity of nanotube-in-oil dispersions. The thermal conductivity and viscosity of these dispersions correlate with each other and vary with the size of large scale agglomerates, or clustered nanoparticles, in the fluids. Fluids with large scale agglomerates have high thermal conductivities.Dispersion energy, applied by sonication, can decrease agglomerate size, but also breaks the nanotubes, decreasing both the thermal conductivity and viscosity of nanotubedispersions. Developing practical heat transfer fluids containing nanoparticles may require a balance between the thermal conductivity and viscosity of the dispersions.

 

CNT agglomerates, prepared by catalytic chemical vapor deposition in a nano-agglomerate fluidized-bed reactor are separated and dispersed. The effects of shearing, ball milling, and ultrasonic and chemical treatments on the dispersing of the carbon nanotubes were studied using SEM, TEM/HRTEM and a Malvern particle size analyser. The resulting microstructures of the agglomerates and the efficiency of the different dispersion methods are discussed. Representative results of annealed CNTs are highlighted. The as-prepared CNT product exists as loose multi-agglomerates, which can be separated by physical methods. Although a concentrated H2SO4/HNO3 (v/v=3:1) treatment is efficient in severing entangled nanotubes to enable their dispersion as individuals, damage to the tube-wall layers is serious and unavoidable. A high temperature annealing (2000 °C, 5 h) before the acid treatment (140 °C, 0.5 h) is recommended and can give well separated nanotubes with a high aspect ratio and 99.9% purity. These highly dispersed CNTs contain few impurities and minimal defects in their tube-bodies and will be of use in further research and applications.

 

CNTs Oil Dispersion are used in adhesives, coatings and polymers and as electrically conductive fillers in plastics to dissipate static charges in electrical equipment and in electrostatically paintable automobile body panels. By the use of nanotubes, polymers can be made more resistant against temperatures, harsh chemicals, corrosive environments, extreme pressures and abrasion. There are two categories of carbon nanotubes: Single-wall nanotubes (SWNT) and multi-wall nanotubes (MWNT).

 

Ultrasonic treatment is a simple and effective method to disperse carbon-nanotubes in water or organic solvents.Carbonnanotubes are generally available as dry material, e.g. from companies, such as SES Research or CNT Co., Ltd. A simple, reliable and scalable process for deagglomeration is needed, in order to utilize the nanotubes to their maximum potential. For liquids of up to 100,000cP ultrasound is a very effective technology for the dispersing of nanotubes in water, oil or polymers at low or high concentrations. The liquid jet streams resulting from ultrasonic cavitation, overcome the bonding forces between the nanotubes, and separate the tubes. Because of the ultrasonically generated shear forces and micro turbulences ultrasound can assist in the surface coating and chemical reaction of nanotubes with other materials, too.

 

Ultrasonication is a an effective procedure to untangle carbonnanotubes in water or organic solvents.Generally, a coarse nanotube-dispersion is first premixed by a standard stirrer and then homogenized in the ultrasonic flow cell reactor. The video below (Click image to start!) shows a lab trial (batch sonication using a UP400S) dispersing multiwall carbonnanotubes in water at low concentration. Because of the chemical nature of carbon the dispersing behavior of nanotubes in water is rather difficult. As shown in the video, it can be easily demonstrated that ultrasonication is capable to disperse nanotubes effectively.

 

As a result, the SWNTs are typically dispersed as bundles rather than fully isolated individual objects. When too harsh conditions are employed during dispersion, the SWNTs are shortened to lengths between 80 and 200nm. Although this is useful for certain tests, this length is too small for most practical applications, such as semiconducting or reinforcing SWNTs. Controlled, mild ultrasonic treatment (e.g. by UP200Ht with 40mm sonotrode) is a effective procedure to prepare aqueous dispersions of long individual SWNTs. Sequences of mild ultrasonication minimize the shortening and allow maximal preservation of structural and electronic properties.

 

Posted on

Thermal of carbon nanotube-in-CNTs Oil Dispersion

Prior work on asymmetric thermally has shown that it is possible to raise the thermal conductivity of low thermal conductivityliquids at modest volume fractions of nanoparticles. Stable and reproducible nanotubedispersions require careful control of the dispersant chemistry as well as an understanding of their response to input energy. This paper addresses the effects of dispersant concentration, dispersing energy, and nanoparticle loading on thermal conductivity and steady shear viscosity of nanotube-in-oil dispersions. The thermal conductivity and viscosity of these dispersions correlate with each other and vary with the size of large scale agglomerates, or clustered nanoparticles, in the fluids. Fluids with large scale agglomerates have high thermal conductivities.CNTs Oil Dispersion energy, applied by sonication, can decrease agglomerate size, but also breaks the nanotubes, decreasing both the thermal conductivity and viscosity of nanotubedispersions. Developing practical heat transfer fluids containing nanoparticles may require a balance between the thermal conductivity and viscosity of the dispersions.
Nitrogen-enriched carbonaceous nanotubes (N-CTs) were prepared by the heat treatment of conducting polyaniline (PANI) nanotubes and then were used as new carbonaceous electrorheological (ER) fluids. Characterization showed that the nanotubular morphology of the original PANI was preserved after heat treatment, whereas the chemical structure and conductivity were changed significantly depending on the heat treatment temperatures. Under electric fields, the rheological properties of the N-CT suspensions prepared by the ultrasonic dispersion of the N-CTs in silicone oil were measured. This showed that the N-CT suspensions possessed versatile ER performance including high ER efficiency, good dispersion stability, and temperature stability. Especially, compared to the corresponding heat treated granular PANI suspensions, the N-CT suspensions showed better dispersion stability and higher ER effect. Furthermore, the ER effect of N-CT suspensions could be adjusted by varying heat treatment temperatures and the N-CTs obtained at around 600 °C exhibited the maximum ER effect. This could be explained by the polarization response, which originated from the regular change of conductivity of N-CTs as a function of heat treatment temperatures.
Benefit from the cost of the raw material of Graphene films reduction, downstream products of graphene have better development conditions, forthcoming graphene mobile phone is one of the application. hwnanomaterial chief scientist said, graphene touch screen mobile phone, lithium battery and thermal film will be using graphene as raw materials, and also provide technical support for the entire product development and application of the graphene mobile phone

Posted on

Applications Fields of Copper Nanoparticles

Copper nanoparticles in different particle size are purple or black. There are no other colors mixed. They have spherical shapes and no obvious agglomeration. Copper nanoparticles have large specific surface area and a number of surface active centers. It is the excellent metallurgical and petrochemical catalyst. The nano-copper powder can be used for the conductive paste. 100 nano copper powder (FCu) producing by this method and dubbed the copper electronic suspensions can be sintered only 0.6 microns thick electrode. It is applied in MLCC and makes the MLCC miniaturization. It optimizes microelectronics technology and replaces silver electric and precious metals such as electronic pulp expected. It greatly reduces the costs. Copper and its alloy nano-powders are used as catalyst with high efficiency, selectivity. It is often found in the process of carbon dioxide and hydrogen and methanol synthesis reaction.

Conductive Silver Powders as the raw material drug (weight ratio of 0.2 to 0.4%) can significantly reduced MDA content, and to improve the oxygen free radicals caused by lipid peroxidation damage, significantly increased SOD content, and enhance the body’s SOD levels, to regulate their characteristics of the functional activity of expression, so as to achieve slow the body’s aging process, intervention, and to postpone the structure of the tissues to the aging transformation has opened up new ways of life science field of anti-aging. Researchers as the preparation of anti-aging and cerebral ischemia, cerebral complications such as therapeutic drug efficacy, easy to take, safe. More experts and professors for the treatment of cancer has made miraculous after anti-so far as to explore its mechanism. Nano-copper powder can also be used to add new medicines in the treatment of osteoporosis, bone hyperplasia materials.
Copper nanoparticles are used as metal nano lubricant additives for metal powder exporter. Adding 0.1 to 0.6% to lubricants, greases, Mount Sassafras process, to set friction pair surface form a self-lubricating, self-laminating, significantly improve the Mount Sassafras vice, anti-wear anti-friction properties. Adding nano-copper powder metal friction self-lubricating oil in the repair agent to a variety of machinery and equipment, metal friction pairs wear part of the self-healing, energy saving. It will increase equipment life and maintenance cycle.