SWCNTs Single-walled Carbon Nanotubes Aqueous Dispersion

MWCNTs Multi Walled Carbon Nanotubes Water Dispersion can be customized at different concentration, such as 1-5%. Or the functionalized types are also available.

MWCNTs Multi Walled Carbon Nanotubes Aqueous Dispersion can be produced with different diameter (10-100nm), lengths(short 1-2um, long 5-20um) and adjusted concentration 2%-5%.

Multi-walled carbon nanotube dispersion is a carbon nanotube dispersion that is uniformly dispersed in an aqueous system by means of dispersion to form a liquid with good dispersibility and stability, which is not easy to stratify or precipitate, and is easy to add to application systems.

Double walled carbon nanotubes can be dispersed in water to make aqueous dispersion for easier use as required. DWCNT water dispersion can be customized as per requirements for better application.

DWCNT Double-Walled Carbon Nanotubes Water Dispersion can be customized as per different concentration and lengths(short tube1-2um, long tube 5-20um). Besides, some treatment can be made also.

Water dispersion of SWNT may facilitate the incorporation of individual nanotubes into the matrix for reinforcement of the composite materials.

Single-walled Carbon Nanotubes aqueous dispersion is a customized material for easier usage in water base. The concentration of SWCNT water solution can be adjusted. Besides SWCNT type, double and multi walled CNTs dispersions are also available.

Silicon Carbide (SiC) Nanopowder / Nanoparticles (SiC, beta, 99%, 50nm, cubic)   Technical parameters of Silicon Carbide (SiC) Nanopowder / Nanoparticles： Particle size: 50nm, 100nm, 500nm, 100-200nm, 0.5um, 1-2um, 5um, 7um, 10um, 15um Purity: 99% Note: Other size specifications of the products, we can provides customized production. Decomposition Temperature: 2973k Thermal Expansion Coefficient: 6.58x10-6 at 373k Thermal Expansion Coefficient: 2.98x10-6 at 1173k Compressibility Coefficient: 0.21x10-6 Density (288k): 3.216 g/cm3 Hardness: 9.5 Mohs Heating Power (KJ/mol): 30.343   Characteristics of Silicon Carbide (SiC) Nanopowder / Nanoparticles： 1. Beta SiC powder has high chemical stability, low thermal expansion coefficient, high thermal conductivity, resistance temperature characteristics is opposite to metal; 2  Beta SiC powder has high hardness, with Mohs hardness of 9.5, next to the dismond, is the wear-resisting material; 3. Beta SiC powder has high temperature resistance, corrosion resistance, resistance to acid and alkali solvent 4. Beta SiC powder has good toughness, superior grinding performance, excellent thermal conductivity of electricity.   Application fields of Silicon Carbide (SiC) Nanopowder / Nanoparticles：       As modified high strength nylon material: nano Beta SiC powder has good compatibility dispersion in polymer composites, and good basic associativity, after modified the strength of nylon alloy tensile is 150% higher than ordinary PA6, wear-resisting performance increased more than three times. Mainly used for the armored tracked vehicle polymer parts, automotive steering parts, textile machinery, mining machinery lining board.       As modified special engineering plastics polyether ether ketone (PEEK) wear-resisting performance: when adding quantity is approximately 5%, can greatly improve and raise the wearability of PEEK (increased by more than 30%)         More information, pls contact us at hwnano@xuzhounano.com. by Alisa

Industrial  nano Gaphene oxide powders with both single layer and multi layer at offer.  It has the advantages of large specific surface area, excellent physical and chemical properties, and easy to combine with other materials through surface functional groups, etc.

Gama aluminum oxide nanoparticles is near spherical, 99.99% purity, widely used as catalyst carrier.

Customized high quality stable Nano Nickel Dispersion for better practical application.

Facory direct offer 100nm 99.99% In nanopowder.Good and stable quality, good sphericity, rich experience in exporting powder goods.Any need welcome to contact us.